What Are Pliers Used? | 34 Types of Pliers

All About Pliers

What Are Pliers Used?

What Are Pliers Used?

The pliers are a multi-purpose hand tool with opposing grips to hold, bend and bite the jaw. The two cross metal parts provide hard levitation to multiply the user’s hand strength. Pliers are an essentials part of every toolbox, as they have many uses for the home.

While you can usually get it with all-purpose pliers, there are other varieties of equipment that accomplish a specific task. Choosing the right plier for the rights job will improve efficiency.

#1. Entertaining

The primary uses of pliers are for gripping. You can put them to work on loosening or tightening bolts, holding objects for stabilization, or removing pins, nails, or other fasteners. The standard utility pliers, formally called slip-joint pliers, have relatively flat jaws with teeth to hold small objects, as well as around, jagged opening to hold larger objects such as bolt heads and nuts.

It happens. Many also have a small scissors-like section for wire cutting. Tongue-and-groove pliers operate on the same principle as utility pliers but have longer handles & offset, or angled, jaws for greater leverage. The jaws are highly adjustable & can open wide for gripping pipes and large nuts.

#2. Bend / Straighten

Pliers can also be used to bend or straighten. The cross braces of the pliers allow superior torque strength to bend and bend objects such as sheet metal, nails, and wires. All pliers can help in turning things, so the type you choose will largely depend on the specific item you need to bend.

Long-nosed or needle-nosed pliers help you catch small objects that may be difficult to reach. Linesman pliers are commonly used by electricians to bend wire and cable.

#3. Cutting

Some pliers are also capable of cutting wire and nails. Diagonal-cutting and side-cutting pliers, commonly called wire cutters, are designed primarily for cutting and separating wires. In most cases, their jaw structure makes wire cutters less suitable for holding larger objects such as bolts. However, because they are effective in catching and removing nails, they are still considered pliers.

#4. Splicing Wire/Stripping Insulation

Electricians use a variety of special pliers to connect wires and separate insulation. For this task, linesman pliers are a popular choice. With wire cutting facilities, you can cut through the insulation of an electrical cable and close a small section to expose bare wire. If you do the same with another electrical cable, you can use pliers to help connect or split the two wires together.

Also, Read: What Is Planer Machine? | Planer Machine | Type of Planer Machine | Working Principle of Planer Machine | Main Parts of  Planer Machine

Types of Pliers:

Types of Pliers

There are only a few types of pliers, but they all have an important function. In some cases, the types may be different to complete a specific task.

34 differents types of pliers are as follows.

1. Crimping Pliers

Crimping Pliers

Hand tools are part of every toolbox. With special features for safety, durability, reliability, and vitality, Gardner Bender Hand Tools provide superior performance on every job. Whether you need cutters, crimpers, strippers, and pliers – Gardner Bender has the perfect tool to complete your electrical toolset. These pliers are a superior multi-use device with a built-in crimper for making wire connections. They easily cut solid/stranded copper cores and aluminum core cords.

The built-in crimper is designed to contain non-insulated, vinyl, and nylon insulated, as well as ignition terminals. With a wide range of excellent features, it is an essential Pliers for every toolbox. Forward-thinking design concepts ensure product usability for generations to come.

  • Cut copper and aluminum wire.
  • Forged carbon steel construction for durability and robustness.
  • Comfortable high-leverage handle design.
  • Ability to accommodate both insulated and non-insulated power wire terminals.
  • A thin nose allows cutting in tight places.

2. Round Nose Pliers

Round Nose Pliers

Round nose pliers are special-purpose pliers for the precise bending of wire. The small tapping jaw of the pliers has a perfectly round cross-section and can be used to make smooth turns in the wire with a controllable bending radius. Round nose pliers are superior to other types in wire bending applications where bending accuracy or appearance requirements are particularly high, such as jewelry, decoration, and fine mechanics.

Not to be confused with the same bail pliers, the round jaws on these pliers are a bit thin and come together to form a triangular jaw design. They are used to make loops in jewelry, especially garlands and similar projects. Some also have insulated handles for use in electrical work.

3. Running Pliers

Running Pliers

Stained glass is used in making crafts; these pliers make a clean break with lines made in glass. The wide-end jaws can be adjusted to match the thickness of your glass, and most have a centerline to ensure proper alignment when moving with the score.

4. Sheet Metal Pliers

Sheet Metal Pliers

The wide, rectangular jaws of these pliers are used to bend sheet metal and form seams. They are commonly found in metal shops & other industries where sheet metals are used. These are sometimes versions of locking players designed specifically for metalwork.

5. Split Ring Pliers

Split Ring Pliers

Resembling a stubby version of a needle nose or chain nose pliers, the split ring pliers have a tilted tip on the lower jaw. This tip acts as a wedge, separating the coiled rings. Split rings are commonly used in the manufacture of fishing tackle and keyrings.

Also, Read: Difference Between Girder and Beam | What Is a Beam? | What Is a Girder?

6. Soft Jaw Pliers

Soft Jaw Pliers

Used for plumbing & scuba diving equipment, soft joe pliers can include many common types of pliers. The differences are that these pliers have padded jaws to prevents scratches on chrome & other soft metals or exposed surfaces.

7. Spark Plug Pliers

Spark Plug Pliers

The narrow jaws of these pliers are either tipped with insulated tongs or a cylindrical holder. As the name suggests, the tips hold the spark plugs by boot or plug wires, assisting in automotive repair.

8. Welding Pliers

Welding Pliers

The jaw combinations of the welding pliers are similar to those of the pliers, with the same tip as the jaw of the needle-nose pliers. The device performs a variety of tasks, including spatter removal, wire grasping, cutting, and even hammering. As the name itself suggests, these pliers are used extensively in welding-based trades.

9. Wire Twisting Pliers

Wire Twisting Pliers

This unusual tool has small jaws along the cutting edge by the fulcrum. There is a cylindrical locking mechanism and threaded knob between the handles. By locking pieces of wire into the jaws & pulling it back on the knob, the entire device rotates, rotating the wire with it. These pliers, commonly used in jewelry making, are also often used by electricians.

Although primarily used in motor racing, the use of safety wire to secure components also has many applications in high-performance and classic road cars. A lock wire or safety wire is a type of positive locking device that prevents fasteners from loosening due to vibrations as well as other forces. Safety wiring also serves as a visual indicator that the fasteners have been tightened properly.

Typically, wire is threaded through a hole, drillers into fasteners or parts then rolled over and re-routed to another fastener or part. This is particularly useful for critical areas such as suspension and brakes but is also very useful for securing other components, such as exhaust manifold bolts or remote oil filter mounting bolts from loosening.

10. Diagonal Pliers

Diagonal Pliers

The edge of the diagonal pliers can be used to cut the rubber or plastic insulation layer of the flexible wire. Pliers blades can also be used to cut wires and strings. When cutting the No. 8 galvanized iron wire, use the blades to cut back & forth a few times around the surface and then pull it back a bit, and the wire will break.

It can also be used’s to cut hard metal wires such as electrical wires and steel wires. Electricians usually use various specifications such as 150.185.200 and 250mm. It can be purchased according to the needs of the line inside or outside.

Pliers’ teeth can also be used to tighten or loosen the nut. Slanted pliers are one of the smaller hardware tools, also known as “slanted nose pliers.” It has the most comprehensive function and is an indispensable tool in daily life and work.

Also, Read: What Is Steam Condenser? | Steam Condenser | Working Principle of Steam Condenser | Types of Steam Condensers

11. Hose Clamp Pliers

Hose Clamp Pliers

Loosening the hose clamp To tighten the hose clamp, in the same way, you simply reverse and rotate the hose clamp screw clockwise. As you know, clockwise is turning something to the right, counterclockwise turning something to the left: spring clamp pliers, Hose pliers, radiator hose pliers.

These pliers are designed to compress the hose and spring clamp, making the connection tight. The most common model has a peg-shaped tooth on each jaw, which is used to pinch the clamp. Some models can also be used directly on the hose.

12. Needle Nose Pliers

Needle Nose Pliers

A set of needle-nose pliers is an essential tool for any task that involves bending, shaping, and cutting wire. They have distinctiveness features that differentiate them from other types of pliers: They are equipped with curved handles that provide both comfort & control, while a smart, spring-action design helps reduce hand fatigue. With its signature feature-needle-nose-tip-toothed teeth, you can extend the reach of your hand to hard-to-reach positions for more precise work.

Some long-reach varieties (13 inches in length) have a dual-spindle design that opens the jaws in tight spaces compared to regular single-axle long-reach pliers. The nose of this device is elongated for greater accuracy and has a cutting edge nears the base. Highly versatile tools; can be used for shaping, bending, & cutting wire.

13. Slip Joint Pliers

Slip Joint Pliers

Slip joint pliers are constructed from premium materials for optimum application to achieve the best fit and specifications for reliability. Mark of Professional Tools is a reputed organization concerned with the manufacture and supply of slip joint pliers and other related products. We have established strong customers relationship by providing innovative, user-friendly, & high-quality products that are built into our sound infrastructure.

Being a reputed manufacturer & exporter in the industry, The Mark of Professional Tools will focus more on the quality and innovation of slip joint pliers and provide impeccable service and reasonable prices for customers. When the jaws are open, the bolt of the fulcrum has a variety of marks to slip into, allowing you to lock to a specific width. They are often used for plumbing applications & can perform many duties—similar to wrench.

14. Snap Ring Pliers

Snap Ring Pliers

The Mark of Professional Tools Retaining Ring is a leading provider of pliers and performance products and is recognized throughout the tool industries for its superior selection, superior customer care, and rapid delivery. We are committed to offerings you the best-retaining ring pliers at the best prices while providing exceptional customer service.

We have extensive experience in developing and providing high-grade pliers for many industries. Please do not hesitate to contact us if you are interested in our retaining ring pliers after referencing our homepage. We are also known as Retaining Ring Pliers, Circle Pliers, Sea Clip Pliers, and Lock Ring Pliers.

These pliers have small, round jaws to help close the snap ring. These rings are open-ended loops that fit into the grooves of a dowel or other round object. Once closed, the ring can rotate freely but is unable to slide sideways. They are commonly used for gear on mountain bikes and similar vehicles.

15. Hilmer Tongue and Groove Pliers

Hilmer Tongue and Groove Pliers

Hilmor quick-adjusting tongue and groove pliers come in 8 “, 10”, and 12 “sizes. A push-button and twice as many grooves as traditional tongue-and-groove pliers allow for quick and precise positioning. V-shaped jaw makes it easier to hold hex, square, or round fasteners, while over-molded handles add comfort and reduce hand fatigue.

These are adjustable-type pliers with a jagged groove with an upper handle, allowing the lower jaw to be closed in multiple positions. Angled jaws make these tools useful for turning nuts & bolts. The popular company Chanelock officially changed its name in 1963 to match the tool, which has been their most well-known product line since the company was trademarked in 1949.

Also, Read: What Is Reaction Turbine? | Reaction Turbine | Working of Reaction Turbine | Parts of Reaction Turbine

16. Pliers

Pliers

The pliers are hand tools used to hold objects firmly, possibly developed from the tongs used to handle hot metals in Bronze Age Europe, to bend and compress a wide range of materials. Are also useful for Typically, the pliers have first-class metal levers that join a fulcrum located close to one end of the lever, forming short jaws on one side of the fulcrum and longer handles on the other side. This arrangement produces a mechanical advantage, which can increase the force of the grip of the hand and focus on an object with precision.

Jaws can also be used to manipulate objects that are too small or cumbersome to manipulate with fingers. Many types of pliers are made for various general and specific purposes. While previous pliers are all commonly found in tool kits, there are many more specific pliers that you mays Nevers encounters outside of their respective trades.

17. Grommet Pliers

Grommet Pliers

Similar to the look and function of eyelet pliers, grommet pliers are used to make holes in tarps & other materials, as well as pasting grommets. Grommets are more heavy-duty than eyelets, making this device perfect for crafts with strong materials such as tents.

18. Hose Grip Pliers

Hose Grip Pliers

These special pliers are designed to easily carry small hoses in or out of tight spaces. Their grabber jaws are shaped to prevent damage to hoses such as vacuum lines, heater hoses, and fuel lines.

Just hold the hose and turn or turn. Hose grip pliers also work great for hose clamps, spark plugs, and various other small components.

19. Linesman Pliers

Linesman Pliers

Although the name may not sound familiar, chances are you may have seen or used them at some point. Easily identified by the jaws, which have a small grip surface at the tip & a cutting surface in the middle, it is a highly versatile tool that is often used in electrical work.

Due to the multi-tool function & jaw strength, it can also be used to bend, bend and cut metal which can be very difficult for other pliers. In some cases, insulated handles are able to protect the user from electric shock, although most models are not rated against shocks.

20. Locker Pliers

Locker Pliers

The several occasions in the past, I have mentioned how a simple pair of locking pliers can be a greats item in your toolboxes. But to my surprise, looking back, I see that these references are brief, and I have not paid full attention to the locking pliers they deserve.

Their name means locking pliers – pliers that lock into position, allowing them to hold objects tightly with remarkable strengths. The exact point at which pliers go from “open” to “lock” is adjustable, allowing you to lock them on objects of different sizes, such as nuts and bolts.

As the name itself suggests, these pliers are designed to lock the jaws in place, making them excellent for holding stripped screws and bolts. A wide variety of jaw sizes are available for this device, allowing you to choose a design that best suits your needs.

Also, Read: What Is an Engine? | Types of Engine | Parts of Engine

21. Nail Puller Pliers

Nail Puller Pliers

Similar to tongs, the tips of its claws are tapered to allow them to dig under the head of the fingernails and take them out. Some variations also have a claw behind the right jaw to provide extra levitation.

22. Oil Filter Pliers

Oil Filter Pliers

These odd-looking pliers have a C-shaped pair of toothed jaws, with one being longer than the other. They are used in the automotive industry to remove oil filter casings.

23. Piston Ring Pliers

Piston Ring Pliers

There are two major designs of piston ring pliers, both of which are used to remove and replace the piston ring in the engine. The first has simple curved tips on the jaws that can be used to stretch the piston ring for easy removal. The second has a large curved set of jaws with multiple braces to support the ring and reduce the risk of war.

24. Push Pin Pliers

Push Pin Pliers

The tips of these pliers are wedge-shaped so that they fall under the pin caps of the plastic anchors. Squeezing the pliers will push the pushpin out, allowing the anchors to be safely removed. The device is used in automotive work as well as other industries where push pin-style anchors are used.

25. Bail Making Pliers

Bail Making Pliers

The jaw of this device consists of two dowels, which are larger than each other. Primarily used in jewelry making, the wire is wrapped around the jaw to form clasps, ear wires, & many other shaped loop components.

Also, Read: What Is Automobile? | Type of Automobiles

26. Battery Pliers

Battery Pliers

Mainly used in the automotive industry for retaining bolts on car batteries and jumper cables, these pliers have small, angled jaws. The lower jaw is slightly shorter, & both jaws are thinkers to make it more durable.

27. Bent Nose Pliers

Bent Nose Pliers

Variations of needles nose pliers consist of a set of jaws that are bent at an angle at the midpoint (usually 45 or 90 degrees). This allows them to hold surfaces when multiple pliers are required, or it is very difficult to reach the angle with normal needle-nose pliers. They are useful in jewelry making; as a result, electricals work & other occupations that relate to wire shaping.

28. Brake Spring Pliers

Brake Spring Pliers

Another useful automotive device, this pliers, is actually a multi-tool specifically designed to handle the springs found in drum brakes. The tip of one jaw is rounded to remove the springs, while the other is rotated to hold the springs back inside. Sometimes, a handle also has a shaft to remove the shoe hold-down pin.

29. Canvas Pliers

Canvas Pliers

The canvas players are made of chrome-plated steel. Fully mating teeth ensure positive no-slip grips. The handle has a built-in spring return that opens the pliers upon your release. 2 1/4 ″ wide cut on canvas. An invaluable tool for artists, these wide-jaw pliers allow a person to do what normally takes two. Jaws are usually padded to avoid damaging canvas surfaces while it is being stretched over the frame.

30. Chain Nose Pliers

Chain Nose Pliers

Featuring the stubby triangular jaw, the chain nose pliers are one of the many tools used in shaping wire and making jewelry. The design of the jaw allows the wire to bend, fold, and shape. When working with beads, the tip assists in closing or opening the bead tips and jump ring.

Also, Read: What Is Centrifugal Pump? | Centrifugal Pump Working Principle | Working of Centrifugal Pump

31. Combination Pliers

Combination Pliers

The jaws of these multi-purpose devices have three distinct segments. From the tip, the first parts are serrated gripping surfaces. A round serrated section behind it makes it easier for gripping tubes and other thick round objects.

Finally, there is a cutting surface in the proximal part of the base. Often mistaken for linesman’s pliers, the latter lacks a round center segment in the jaw.

32. Eyelet Pliers

Eyelet Pliers

An important component in the sewing, cobbling, and other clothing industries, eyelets allow the addition of laces and drawstrings to the fabric. These holes have a ring and long hub that must bend downwards. Most modern eyelets pliers have interchangeable dies to allow for both punching and crimping, although some have only a crimping surface or a wheel in the upper jaw that has various die tips.

33. Fencing Pliers

Fencing Pliers

This curious-looking multi-tool resembles a two-handled hammer when viewed from above. The notch in the fulcrum allows you to cut the strings of various gauges, while the staple in the left jawbone has a hammers surface for driving. The rights jaw paws can be used to remove staples, & the jaw itself has a gripping surface and a round grip hole.

34. Flat Nose Pliers

Flat Nose Pliers

The Mark of Professional Tools tool seeks to research and develop quality, energy-efficient flat nose pliers to benefit consumers. As a leading supplier of flat-nose pliers, we provide professional flat nose pliers. The team of Professional Tools is second to none. Our knowledge, energy, and passion ensure that you get the best possible results for your customers.

If you have any questions about Flat Nose Pliers, contact The Mark of Professional Tools Support Team directly. They will provide specifics bits of advice in choosing the systems that meet the technical specifications & approvals to provide the most cost-effective solution for you. The flat, tapered jaws of these pliers are used to hold and rotate the metal, as well as lead and wires.

It is a common device in both electrical and mechanical works. They can easily make sharp turns and right angles with wire and also work well for straightening. Available with a short or long nose.

Also, Read: Keyless Remote Battery Is Low | When Does Key Fob Battery Replacing Replacing? | How to Replace a Keyless Remote Battery


Frequently Asked Questions (FAQ)

Types of Pliers

  • Crimping Pliers
  • Round Nose Pliers
  • Running Pliers
  • Sheet Metal Pliers
  • Split Ring Pliers
  • Soft Jaw Pliers
  • Spark Plug Pliers
  • Welding Pliers
  • Wire Twisting Pliers
  • Diagonal Pliers
  • Hose Clamp Pliers
  • Needle Nose Pliers
  • Slip Joint Pliers
  • Snap Ring Pliers
  • Hilmer Tongue and Groove Pliers
  • Pliers
  • Grommet Pliers
  • Hose Grip Pliers
  • Linesman Pliers
  • Locker Pliers
  • Nail Puller Pliers
  • Oil Filter Pliers
  • Piston Ring Pliers
  • Push Pin Pliers
  • Bail Making Pliers
  • Battery Pliers
  • Bent Nose Pliers
  • Brake Spring Pliers
  • Canvas Pliers
  • Chain Nose Pliers
  • Combination Pliers
  • Eyelet Pliers
  • Fencing Pliers
  • Flat Nose Pliers

What Are Pliers?

The pliers are a multi-purpose hand tool with opposing grips to hold, bend and bite the jaw. The two cross metal parts provide hard levitation to multiply the user’s hand strength.

Plumbing Pliers Types

Plumbing Pliers and Water Pump Pliers at Trade Counter Direct. Plumbing Pliers are also known as tongue and groove pliers, water pump pliers, adjustable pliers, groove joint pliers, arc-joint pliers, multi grips, and channel locks. They have serrated jaws generally set between 45 to 60 degrees from the handles.

Jewelry Pliers Types

Types of Jewelry Pliers

  • Flat Nose Pliers.
  • Round Nose Pliers.
  • Chain Nose Pliers.
  • Bent Nose Pliers.
  • Flat & Half Round Pliers.
  • Flat & Round Pliers.
  • Concave & Round Pliers.
  • Wire Wrapping Pliers.

What Are Pliers Used For?

Pliers are made in various shapes and sizes and for many uses. Some are used for gripping something round like a pipe or rod, some are used for twisting wires, and others are designed to be used for a combination of tasks including cutting wire.

What Are Needle Nose Pliers Used For?

Needle-nose pliers are used to manipulate wire using the textured teeth. When working with this tool, the handles should be gripped tightly yet apply gentle force. They are not sturdy enough to cut large, hardened wires, and they are not to be used on live electrical wires.

What Are Snap Ring Pliers Used For?

Circlip pliers are sometimes referred to as retaining ring pliers, snap ring pliers or C-clip pliers. They’re designed for installing or removing circlips, a type of fastener that works like a retaining ring.

Different Types of Pliers

There are several different types of pliers commonly used for various tasks. Here are some of the most common types:

  1. Slip-joint pliers: These have an adjustable pivot point, allowing the user to switch between different grip sizes.
  2. Needle-nose pliers: They have long, narrow jaws with pointed tips, ideal for reaching into tight spaces or gripping small objects.
  3. Diagonal pliers (also called wire cutters): These pliers have angled jaws that come to a sharp point. They are primarily used for cutting wires and small gauge metals.
  4. Linesman pliers: They have gripping jaws, cutting edges, and crimping features. They are commonly used by electricians for cutting, bending, and gripping wires.
  5. Tongue-and-groove pliers (also known as Channellock pliers): These have adjustable jaws that can be set to different positions. They provide a strong grip and are suitable for a wide range of tasks.
  6. Locking pliers (also called Vise-Grips): These pliers have a built-in locking mechanism that allows them to clamp and hold objects securely in place.
  7. Flat-nose pliers: They have flat and wide jaws, making them useful for gripping and bending materials.
  8. Round-nose pliers: These pliers have round, tapered jaws, often used in jewelry making and for creating loops or curves in wires.
  9. Crimping pliers: They are designed specifically for crimping connectors onto wires, commonly used in electrical work or for creating jewelry.

Type of Pliers

There are various types of pliers used for different purposes. Here are some common types:

  1. Slip-joint pliers: Adjustable pliers with a sliding pivot point, allowing for different grip sizes.
  2. Needle-nose pliers: Long, narrow jaws with pointed tips, used for precise gripping in tight spaces.
  3. Diagonal pliers (wire cutters): Angled jaws for cutting wires and small gauge metals.
  4. Linesman pliers: Heavy-duty pliers with cutting edges and gripping jaws, commonly used by electricians.
  5. Tongue-and-groove pliers (Channellock pliers): Adjustable pliers with multi-position jaws for a strong grip.
  6. Locking pliers (Vise-Grips): Pliers with a built-in locking mechanism to hold objects securely.
  7. Flat-nose pliers: Pliers with flat and wide jaws, used for gripping and bending materials.
  8. Round-nose pliers: Pliers with round, tapered jaws for creating loops or curves in wires.
  9. Crimping pliers: Pliers specifically designed for crimping connectors onto wires.
  10. Bent-nose pliers: Pliers with angled jaws for accessing hard-to-reach areas.
  11. Snap-ring pliers: Pliers designed for installing or removing snap rings or circlips.
  12. Fencing pliers: Pliers with features such as wire cutting, staple pulling, and gripping, commonly used in fencing work.

What Is Pliers?

Pliers are hand tools used for gripping, bending, cutting, and manipulating objects. They typically consist of a pair of hinged jaws, with handles at one end and the jaws at the other. The jaws of pliers can come in various shapes and sizes depending on the specific task they are designed for. Pliers are commonly made of steel or other durable materials and are used in a wide range of industries and applications, including electrical work, automotive repair, construction, crafting, and more. They are versatile tools that provide mechanical advantage and allow users to exert force and control over objects with their strong grip.

Function of Pliers

Use to grip small objects, reach awkward places, holding wires, bend loops, and attach wires.

Kinds of Pliers

  • Slip Joint Pliers.
  • Water-Pump Pliers (Tongue-and-Groove Pliers)
  • Locking Pliers.
  • Linesman’s Pliers.
  • Cutting Pliers.
  • Needle Nose Pliers.

Mechanical Pliers

Mechanical pliers are a type of pliers that incorporate mechanical mechanisms to enhance their functionality and ease of use. These pliers typically have additional features beyond basic gripping and cutting capabilities. Some examples of mechanical pliers include:

  • Self-adjusting pliers: These pliers have an automatic adjusting mechanism that allows them to adapt to different sizes of objects. They eliminate the need for manual adjustment and provide a secure grip on various materials.
  • Ratcheting pliers: These pliers have a ratcheting mechanism that allows for multiple consecutive squeezing motions without the need to release and reapply pressure. They are especially useful when working in tight spaces or when repetitive gripping is required.
  • Compound-action pliers: These pliers use a compound lever system to increase the gripping force while reducing the effort required from the user. They provide enhanced cutting power and are commonly used for heavy-duty applications.
  • Multi-function pliers: These pliers incorporate multiple tools or functions into a single unit. They may include features such as wire cutters, crimpers, bolt cutters, screwdrivers, or other tools, providing versatility and convenience for various tasks.

What Is Pliers Tools?

What are pliers? Pliers are a type of hand tool. They allow the user to firmly grip an object – usually something like a nail or wire – so it can be tightened or loosened, twisted or cut. Pliers generally consist of five parts: two handles, a pivot and two jaws.

Plier Is Used to Like Nut and Bolts

Pliers are often misused as general-purpose tools. Their use should be limited to operations for which they were designed: gripping and cutting (never for loosening or tightening nuts). Always use wrenches on nuts and bolt heads, never use a pliers.

What Is the Usage of a Plier?

pliers, hand-operated tool for holding and gripping small articles or for bending and cutting wire. Slip-joint pliers have grooved jaws, and the pivot hole in one member is elongated so that the member can pivot in either of two positions in order to grasp objects of different size in the most effective way.

Positive Grip Pliers

Positive grip pliers, also known as locking pliers or Vise-Grips, are a specific type of pliers that feature a locking mechanism to provide a secure grip on objects. The key feature of positive grip pliers is their ability to lock onto an object and hold it in place, allowing the user to work hands-free or apply constant pressure without needing to maintain a grip.


Leave a Comment

Join the Home of Mechnical Engineers 👉🏼

X
/* */