Hammer and Their Uses:
One of the most common tools we use for various projects throughout our lives is a hammer.
It is a tool that allows us to handle materials, often destroy them, later reshape them, and create something better and more beautiful.
Understanding the uses of hammer and what a hammer is used for can be a bit tricky as there are how many types of hammer available.
The hammer parts can be divided into three main components. The head is not only the part with which you hit things, showcasing the primary hammer function, but also the part that fits over the handle and acts as the fulcrum on the claw hammer when pulling nails.
The head is not only the part with which you hit things but also the part that fits over the handle and acts as the fulcrum on the claw hammer when pulling nails.
Parts of Hammer:
or their simple, almost primitive form, hammers are incredibly versatile and specially designed tools. Understanding the function of hammer and its various types of hammer in workshop settings is crucial.
Depending on what you need the hammer most for, the manufacturer will tailor the specific hammer part to suit.
Knowing what each part of the hammer is and how it fits into each hammer’s particular use will go a long way toward choosing the best hammer for you.
Hammers come in many shapes & sizes, each constructed to fulfill their own unique functions.
Because of this, many aspects of the hammer vary, and choosing the right one, especially when considering the 5 uses of hammer, can prove difficult. Regardless of the types of hammers and their uses, they will each have the following nine basic components:
The face is the front part of the hammer. It is usually very easy to tell what the hammer is designed for based on the shape and size of the face relative to the rest of the tool.
For example, tack hammers have smaller faces because they perform small, detailed tasks. A sledgehammer designed for brute power has a large face.
Although limited, there are a few options you have for hammer faces that will make a big difference in performance. Factors include:
Most hammers have a small convex face, which is sufficient for most users. However, an alternative option is a milled or “waffle” faced hammer.
It provides a bit more grip when hitting nails and is an ideal choice for users with less experience.
However, it is worth noting that hammers with milled faces will leave an impression on the physical surfaces you are striking.
Similar to milled face hammers but slightly less abrasive, textured faces let you add a unique look to metal and wood surfaces.
Some texture options include crosshatches, wide stripes, and inverted dimples. To create even more unique patterns, textures can be overlapped.
Hammers intended for heavy-duty work have a large face. On the others hand, hammers designed for more delicate tasks tend to have smaller diameter faces.
The hammer neck serves two important roles: attaching the head to the handle and providing balance to the hammer.
The length will vary depending on the type of hammer you choose.
The neck of the hammer is what connects the head to the handle. Just like with the face, if you have a hammer designed for brute strength, you probably won’t have much of a neck.
But if you have to strike with a little precision, you’ll probably have a neck to give you better visibility.
Most people have a very basic mallet. On the side of the head opposites, the face is the claw used to pull the nails.
But for all hammers, that side is intended for use. For things like a sledgehammer, both sides can serve as faces.
For metal hammers, instead of claws, you have a peen. Peen is used to shape the metal.
If one basic element of each hammer is the head, then the other is the handle. Most hammers have a very simple handle.
It’s just a stick of wood. Some may have a handle made of some kind of metal is used for special purposes. But they will all have some kind of handle.
If you have anything made of rubber slipped around the handle, it’s the grip. You won’t get a grip on every hammer because it’s not needed. If you need a hammer on which it is important to maintain a solid grip, you will need a grip.
Head, sometimes referred to as the anvils, is parts of hammers that do most of the work. This is the weighted piece that rests on top of the handle of the hammer.
As you move the hammer, the head itself gives the impact. The weight, size, and shape of the head vary greatly depending on the type of hammer. When it comes to hammerheads, the major factor to consider is weight.
A hammer with a heavy head will add a significant amount of weight to the entire instrument.
While this can be very helpful for heavy blows, it is not ideal for delicate or precise tasks. The two basic elements of a hammer are a handle and the thing that sits on top of it. That’s the head.
This is the entire top of the hammer, and everything else is part of the head. The intended use of the hammer will determine the basic design of the head.
Rock and metal hammers look like large rocks on top of the handle. Wooden hammers have a real design.
Simply put, the cheek is the edge of the hammer and holds everything together. This part of hammers experiences the most stress and is often the point of weakness in subpar hammers.
Cheek on wooden hammers is much more important than on hammers made of any other material.
Whatever the purpose of the hammer, the head is going to have two cheeks, which are the two horizontal sides of the hammerhead.
The shape of the cheek is determined by the purpose of the hammer. Normally, you don’t use the cheekbones of a hammer for anything, but in a pinch, it can work as a temporary facial.
The eye is located on the underside of the hammerhead, allowing it to easily slide onto the handle. Steel hammers do not have eyes – they are more common on hammers with wooden and sometimes rubber handles.
The eye is the hole in the bottom of the head that slips onto the handle.
Hammers used for wood have a neck while hammers for rock and metal do not; that is, hammers for wood have eyes while hammers for metal and rock do not.
9. Claw or Peen
When buying a hammer, especially when considering the straight peen hammer uses, the claw is one of the most important factors to consider.
Although not all hammers have a claw, they perform a very specific function. Claws can be used to rip wood, pull nails, and basically act as a pry bar to take things apart.
Hammers have one, and the claw can be found opposite the face of the hammer. The two most common types of the claw are:
This is most likely what type of claw you are familiar with. Curved claws have two curved heads that act as the perfect tool for removing or scraping away nails.
Straight claws hammers are generally much heavier than their curved counterparts. Their main aim is to destroy materials like plastic and wood.
Useful Article for You
- Types of Wrenches
- Types of Bolts
- Types of Pliers
- Different Types of Cars
- Types of Tools
- Types of Planes
- Types of Springs
- Types of Airplanes
- Types of Welds
- Types of Measurement
- Types of Chain
- Types of Car
- Types of Nuts and Bolts
- Types of Motorcycle
- Types of Car Engines
- Types of Heat Exchangers
- Types of Pulleys
- Types of Spark Plugs
- Types of Coupling
- Types of Brakes
Types of Hammers:
Different types of hammers and their uses are perfectly sized to create the final result; the list includes:
1. Claw Hammer
Claw hammers range in weight from 8oz -20oz and often feature multitudes of handle materials, designs, and lengths, & a smooth striking face.
It is known for its curved claws or the peen on the back of the hammer. Its curved metals tines are uses to increases the leverages needed to remove nails, staples, or anything embedded in wood or other material.
So simple but so effective, it’s no surprise that the claw hammer is probably the most widely used hammer today.
The hammerhead, popular in the construction industry and the DIY market, is specifically curved in that one side is used to hammer nails into the material while the split head, on the other hand, is used to extract nails.
2. Cross Peen Pin Hammer
A mild variation of the cross peen hammer, this tool is not suitable for metalworking. Instead, it is most useful in cabinetwork, light joinery, and other woodworking tasks.
The cross peen pin hammers are a smaller version of the cross peen hammers that is more suitable for wood and not suitable for metal & other hard materials.
It has the same small traditional hammerhead & wedge head and is used more for light joinery and complex cabinetwork.
The relatively lightweight nature of the Cross Peen Pin Hammer makes it ideal for relatively soft materials.
3. Engineering Hammer
The engineer’s hammers were traditionally used for locomotive repair and had a rounded head and cross peen.
The term is also commonly associated with heavy ball peen hammers and hammers, which have around double heads.
An engineering hammer is a hard-wearing, durable tool traditionally used for locomotive repair and other similar activities.
It has a round head and a cross peen making it ideal for particularly difficult repairs. Terms are also used to describe ball peen hammers and round double head hammers.
4. Hatchet Hammer
The hatchet hammers are a hybrid between hammers and an axe. The blade of the axe is used as a traditional axe, but in the opposite direction to a traditional hammer.
In theory, there are many situations in which a hatchet hammer would be useful, but they are often associated with survival/emergency situations.
One of the more unusual types of hammers, the hatchet hammers, sometimes referred to as half-hatchets, has an axe blade instead of peen.
5. Planishing Hammer
These hammers have a beak with a slightly convex head and a cylindrical die.
It is used to precisely shape and smoothes the metal on the planning stage, allowing the metal to take the shape of the head of the stake.
A leveling hammer is a relatively small hammer traditionally used for fine-shaped and smooth metal.
It consists of two identical hammers, one of which is slightly convex and the other with a cylindrical die with a peen tip.
Due to the shape of hammers, it is possible to exert significant force with limited damage to the metal.
Also, Read: What Are Pliers Used? | 34 Types of Pliers
6. Power Hammer
Power hammers are large stationary forging hammers that use compressed air to move a large piston up and down and to shape the material underneath.
As the name suggests, a power hammer is capable of exerting extreme pressure by using compressed air that is used to power large pistons.
The hydraulic system is perfected for shaping steel & other similar types of materials that are less malleable with more traditional manuals hammers.
When you consider that the piston’s head can move up and down 200 times a minute, you begin to appreciate the potential power.
7. Rip Hammer
This is the professional’s answer to claw hammers featuring a straight claw rather than a curved and heavyweight.
As the name suggests, rip hammers are not only used in construction but are also extremely popular in demolition.
Described by some as the professional’s answer to the claw hammer, it is heavier in weight, and the claw component is straight, unlike the curved ones on a traditional claw hammer.
It should be one of the more durable hammers widely used in construction/demolition, such as digging holes for demolishing wood and brickwork.
8. Mechanics Hammer
As you can guess, a mechanic’s hammer is vital for removing dents from car panels.
The design differs greatly from that of a conventional hammer with a flat metal hammerhead complemented by a pointed impact tool.
Watching mechanics remove dents from a car panel is a pleasure & art in itself.
9. Chasing Hammer
The design of a chasing hammers is very different from your traditional hammer with a long rounded handle and a hammerhead that has a flat impact area and a ball-peen.
Traditionally used with metalwork and riveting, it provides a good mix of good old-fashioned force as well as the ball-peen tool used to flatten rivets along the surface.
10. Ball Peen Hammer
Ball peen hammers are typically forged from high carbon steel and ground to finish. It has a round bell and a flat striking hammer face.
It derives its identifier from the opposite side of the face being struck with a hammer called a peen or peen.
The peen is hemispherical and is commonly used for intricate rounding work and for making gaskets.
Ball peen hammers are often found in machinists, metalsmiths, & blacksmith’s toolboxes.
There are several types in the family of ball peen that handle different specific functions.
A machinist’s hammer, also known as a ball-peen hammer, is used in metalworking, offering a relatively small hammer with a flat impact area and a round head tool.
It is one of several hammers used for tasks such as riveting, offering a stopping tool to punch the rivet into the metal & round it.
11. Tinners Hammer
These hammers have a square head, and a pointed cross pen. They are used to meet seams and establish a rolled edge in metalworking.
A tinner’s hammer forged from a single piece of metal is mainly used in the metal roofing industry.
The hammerhead has a slightly beveled flat head and a rounded cross peen. This is perfects for hammerings rivets into the ceiling and sinking them with a rounded edge.
12. Prospectors Hammer
A favorite of geologists, this hammerhead sports a flat smooth, or textured striking face.
The peen tapers to a single spike-shaped claw that proves very useful during complex groundwork.
The handle is short and engineered to minimize hotspots while maintaining a comfortable grip.
Commonly associated with geologists, the prospector’s hammer provides both a flat-edged hammer for breaking stones and a chisel tool for more complex work.
These are the kind of hammers you see in movies where experts are digging up fossils.
13. Toolmaker’s Hammer
While explicitly associated with toolmakers, the toolmaker’s hammer is also used in many other environments.
While the handles can vary in size and materials, the hammerhead is exactly the same, with a flat impact area & a rounded tool.
This is complemented by a magnifying lens places just below the hammerhead, which creates an eye-catching look.
Perhaps one of the most unusual-looking hammers, the toolmaker’s hammer consists of a ball pen and round head.
There is a magnifying glass in the center of the head. It is used for delicate work in a machine shop.
14. Dead Blow Hammer
The head of this hammers is specially designed for minimal recoil and soft blows. It usually has either solid rubber or plastic head or a semi-hollow head filled with sand or leads shot.
It is designed to minimize any damage on the contact area with the minimal rebound, where location also helps at a premium.
Consisting of two identicals hammerhead tools, this type of hammers can be used for a variety of different tasks.
They can be used in everything from woodwork to automotive application, where they aid in removing parts, fixing smalls dents, and knocking woods together or without stripping the surface.
15. Splitting Maul Hammer
The Splitting Maul Hammer is best described as a cross between a sledgehammer and an axe. The head of the ax comes to a sharp point and is used to split the wood.
The sledgehammer’s side of the hammerhead can be used to hammer the wood or, more commonly, to push a nail as deep as possible to open the wood for the ax tool.
Both the sides of the head are shaped in such a way that the chances of getting stuck in the wood are minimized.
16. Slaters Hammer
The Slater’s Hammer is an extremely useful tool that consists of a claw head for removing nails, along with a sharp-pointed head for punching holes in the slate and a sheer edge that shapes the slate to fit snugly.
There is also a more traditional hammer-shaped head that allows nails to be hammered at home. Effectively four tools in one!
17. Dental Hammer
While thankful, fully dentistry has arrived in recent times, it is not that long ago that ancient dental hammers were used during healing.
Traditionally they were either a cylindrical shape with two flat ends or two flat discs placed on either side of steel balls.
We can only imagine excruciating, pain but after ling, they were used to condense the filling material.
It is not clear how they affected the success rate of fillings and taking into account the pressure and frequent tapping on the tooth.
18. Copper and Hide Hammer
While copper and hide hammers may not be as famous as the other hammers on this list, they are perfect for shaping metals without actually penetrating the surfaces.
The hammer end is copper on one side and raw leather on the other. This allows metals, such as car bodywork, to be shaped back into shape without damage. It May is old-fashion, oned but it is extremely effective!
19. Lath Hammer
Lath hammers are used when manipulating the thin flat strips of wood that form the foundation of a plaster wall.
The ax head allows the wood to be trimmed to size, the notch helps remove nails, and the traditional hammer striking head is useful when driving nails into the wood.
Lath hammers have a metalhead and shaft with a rubber handle that absorbs impact forces.
20. Rock Hammer
Also known as a pick hammer, this small tool, often seen in a hammer diagram, has a flat head and either a chisel or a pick on the back. They are most commonly used in geology & historical excavation to break small rocks.
Rock hammers are traditionally used in the fields of geology and quarrying. It provides an opportunity not only to chisel stones and bricks but also to break flat rocks.
We have also seen variations of the rock hammer used by bricklayers to loosen and part brickwork joints.
Due to the length of the pick hammers, it has proven useful even when digging small holes.
21. Scaling Hammer
The Scaling Hammer is a strange-looking tool consisting of a vertical chisel and pick.
This type of hammers is extremely useful when removing not only scale & rust but also extremely hard coatings from inside boilers that can build up over the years.
Featuring a vertical chisel & pick instead of the usual head, these hammers are used to remove scale, rust, & various types of hard coating from boilers & other surfaces.
Pneumatic versions range from single-headed to triples-headed models & function more like a jackhammer.
22. Shingle Hammer
The shingle hammers are hybrid of various hammers and are often referred to as roofing hammers.
It has a spike head & a square head and usually includes a short claw for pulling out nails. Spikes are used to creating nail holes in shingles and slates that will often crack and break when using a conventional hammer.
Once the hole is made, the square’s head is used to push the nail through the slate/shingle, and it is mounted on a roof or similar structure.
23. Spike Maul Hammer
These long-lasting hammers are used to drive rail spikes from the opposite side of the tracks.
This is a hammer traditionally used to force spikes into the ground that holds train rails in place.
There are two types of Spike Maul Hammers, one having a square tapered head that complements the main driving blocks.
There are also bell variations with long slender cylindrical ends, one of which is thicker and the other longer.
It is difficult to understand the tremendous workload required to lay the track and ensure that each spike is firmly in place.
24. Straight Peen Hammer
It is essentially the same as the cross peen hammer, except that the peen is aligned vertically.
The straight peen hammers are similar to the cross peen variation and are perfect for shaping and nailing metal.
The only difference in a cross peen hammer is that the peen (pointed end) is parallel to the hammer shaft as opposed to vertical.
The size and shape of the peen may vary, as may the block hammer ends.
25. Knife-Edged Hammer
For all intents and purposes, a knife-edged hammer is similar to an ax with a flat square hammer on the opposite side.
It is much easier to cut and split the wood using a knife-edge, while a flat surface is useful for sharpening the wood.
Softening the wood (or driving a nail into the wood) and then splitting it with the edge of a knife is a perfect combination.
26. Rock Climbing Hammer
Rock climbing hammers are also knowns as wall hammers, ed hammers, and big wall hammers and play an integral role in rock climbing.
They allow the climber to place & remove pickets, copper heads, and stationary anchors.
The pointed end of the hammerhead helps to position/loosen the anchor’s bolts, and the blunt end is perfect for hammering them home.
27. Brick Hammer
Used by stonemasons, a brick hammer is capable of shaping and splitting stone, brick, and concrete.
It has a sharp chisel peen with a smooth square face. The advantage is a chisel with enough weight that you don’t need extra hammers or two hands to cut or breaks rocks.
There are consistent themes with all hammers you will find. Most hammers do not perform just one function, revealing the need and convenience of applying one tool to multiple tasks.
Often referred to as stonemason hammers, the brick hammers are designed to function as both a traditional hammer and a simple chisel tool.
The blunt end of a hammer is used to split stones and hard masonry, while the shape of a chisel can be used to round the edges and small pieces of stone.
28. Framing Hammer
It is easy enough to confuse a framing hammer with a simple claw hammer, but there are some subtle differences.
The framing hammer is very heavy, about twice the weight of a traditional claw hammer, and is designed to reduce the excessive force on large nails.
The framing hammer has gone through an incredible re-engineered and design process in recent years.
Some brands have moved towards increased ergonomic maneuverability while retaining the original anatomy of the framing hammer.
From the curved handle and neck, they are changing the geometry of the angled striking head to the use of lighter material such as titanium to reduce user fatigue while increasing striking force.
Its most recognizable feature is the checkered face or waffle face affectionately known as the “Union Stamp” in my shop.
The checkered face framing leaves a lasting impression in the wood while adding a tremendous amount of anti-slippage when striking.
29. Welder’s Hammer
While hammers welding itself may be an art form that is rapidly disappearing from the modern-day world, a welder’s hammers are a very useful reminder of the bygone days.
This specialized tool is used to remove waste material from around a weld with a pointed tool and chisel tools on either side of the hammer.
30. Electricians Hammer
Most electricians I’ve met never have a hammer and always have to borrow mine. I’m not sure many people know that there is a hammer specifically for electricians.
That being said, it does have some attractive features, such as an elongated throat, which allows it to pull out the access hole in the junction box, and notably, the Romex staple and fiberglass neck to remove the over-molded rubber handle Designed claw tines.
While many different hammers are completely refined replicas of the traditional claw hammer, there are some subtle differences.
The so-called electrician’s hammer consists of a claw tool at a different angle and a polished tempered steel head for impact force.
The handle is made of high-strength fiberglass capable of absorbing the shock of multiple impacts.
31. Drywall Hammer
A drywall hammer, like its name, is used specifically for hammering up or down drywall.
Unlike a standard hammer, it often comes with a serrated front face, which makes it more suitable for hammering nails and driving them precisely. A drywall hammer is an innovative tool that’s probably more useful than it looks at first glance.
The traditional impact head is engraved with a waffle shape that lets you hammer nails into drywall without breaking the outer layer.
It also adds a bevel effect to the wall, which can be useful when adding new layers of plaster etc.
On the others sides of the hammer’s head are a simple nail extractor, an ax-shaped sharp edge for scoring, and a useful hook for allowing multiple. People using their hammers to move strips of drywall.
32. Soft Face Hammer
Although softness is not something commonly associated with hammers, soft-faced hammers serve a wide range of purposes in both commercial and home use.
Soft-faced hammers have heads made from a variety of materials such as brass, nylon, lead, or even rolled cast iron; Standard hard-faced hammers have heads made of alloy steel.
Soft-faced hammers are preferred for jobs that require precision or involve soft metals that should not be damaged.
33. Railroad Spike Maul Hammer
The Railroad-Spike Maul Hammer is a precision-designed tool used to hammer railroad spikes onto railroad tracks.
Hammerhead itself is relatively thin, the hammer’s handles, although the design, handle length, and hammerhead allow for maximum impact force.
34. Stone Sledge Hammer
This mason’s version of the Sledge Hammer is specially designed for breaking stone and concrete.
Instead of double-headed, the striking face is oval, and the small straight peen serves as a blinking face to create the scoring line.
As the name suggests, stone sledgehammers have traditionally been used to break massive rocks into more manageable pieces.
The long handle & relatively small head are perfect for those looking to create maximum impact force where accuracy isn’t essential.
It is the type of hammer that relies on brute force.
35. Blacksmith’s Sledge Hammer
Like many blacksmith tools, the blacksmith’s sledgehammer goes back many years & is used to shape pieces of metal such as iron.
The large flat metal head & extended handle allow for the creation of significant impact force.
While brute force is emphasized to shape various pieces of metal, the precise impact is also required.
Also, Read: What Is Automobile? | Type of Automobiles
36. Half Hatchet Hammer
The half-hatchet hammers are simply a cross between an axe & hammers, affording the user a variety of different options.
Sometimes referred to as rigging axe, it can be used in many different everyday scenarios.
37. Trim Hammer
Trim hammers have a straight claw & are shorter than normal claw hammers. Sometimes referred to as finish hammers, these have smooth faces for driving trim nails without damaging the surrounding surface.
As the name suggests, trim hammers are more delicate than a traditional nail hammer.
These hammers are compact and lightweight & are very popular in the carpentry industry.
The polished steelhead & smooth texture do not mark the surface when flushing nails.
38. Club Hammer
The club hammer is a smaller version of a sledgehammer where brute force is required to break masonry, stones, & demolition work.
It can also be used as an impacts tool where you want to chisel stone/hard metal where precision is probably not needed.
Often referred to as drilling hammers or lump hammers, this tool has a small, double-faced head similar to a sledgehammer.
While not suitable for commercial work, the club hammer is useful for steel chisels and masonry heads, as well as light demolition work.
39. Boiler Scaling Hammer
Boiler Scaling Hammer, specially designed for removing deposits and scale from metalwork. The head is shaped like a chisel, with one end vertical and the other horizontal, and equipped with a hickory handle.
The name gives it away because the Boiler Scaling Hammer is an important element of a fitter’s and welder’s toolkit.
The hammerhead is made of hard metal with both horizontal and vertical chisel heads, which are perfect for removing scale from boilerplate. It can be used in others scenarios as wells.
40. Piton Hammer
Also known as a rock climbing hammer, this hammer has a hole in its straight beak for removing pits.
The head can be anvil style with a hollow handle and heavy or light depending on the type of rock climbing.
Heavier models will drive more pits quickly with less fatigue, but lighter models are used when driving fewer pits to reduce weight.
Many piton’s hammers have interchangeable heads to allow a wider range of climbing methods.
41. Blocking Hammer
Featuring a flat, squares head on one side and a cylindrical head on the other, this is another hammer commonly used by blacksmiths.
We see that there are many hammers used in the blacksmith trade and the blocker hammers are another one to add to the lists.
While the wooden handles are traditional, this hammer has a flat square head on one side and a cylindrical-shaped head on the other.
The Blocking Hammer is the perfect tool when shaping metal on an anvil or block.
42. Brass Hammer
Brass hammers have a tapered, cylindrical double-head that is used for sharpening steel pins without damaging the surrounding surface.
As the name suggests, the brass hammer has a brass cylindrical double head that is perfect for hammering steel pins into various materials without damaging the surrounding area.
While useful in arrays of different scenarios, it is often used in the automotive industry and traditional woodworking shops.
43. Cross Peen Hammer
The cross peen hammer has a wedge-shaped option with a conventional hammerhead.
People who have hit their fingers when trying to pin a panel or tackle wood or plasterboard, for example, will appreciate these hammers.
The wedges side allows you to start the pin or tackle without the risk of damaging your finger.
The nail-like beak of this hammer is aligned horizontally. It can be used to initiate panel pins or tacks without the risk of hitting your fingers. It is also used to shape metal.
44. Tack Hammer
Tack hammers, or upholstery hammers, are used by people who are in the business of making seats and chairs with soft padding.
These hammers are used to hammer upholstery by using small nails in wooden frames. A tackle hammer is comparatively light in weight and has a claw head. Most of them these days usually have magnetic hammer
A nail hammer is used when securing upholstery using small nails or specialist nails.
The hammerhead’s two sides can vary between a traditional small impact area and one that is magnetized to help position the nail or a small nail remover similar to claw hammers.
These hammers are relatively small & perfect for delicately securing upholstery.
45. Sledge Hammer
Sledgehammer doesn’t need much introduction! With the relatively large head and extended handle, it is possible to achieve significant impact speeds that are perfect for tasks such as breaking rocks and fencing postings into the ground.
The hammerhead is larger than normal, is traditionally made of metal, and can take extreme impact forces.
46. Blacksmith’s Hammer
The blacksmith’s hammer has an interesting history of its own that goes back many centuries.
Effectively it is designed for multipurpose forging whereby a blacksmith can bend and cut away extremely hot metal materials to create a distinctive product. This is a specialist tool & is not designed for conventional use.
47. Bushing Hammer
In its simplest form, a bush hammer is an important masonry tool that allows stone and concrete to be texturized.
These tools have small pyramid-like designs on hammerheads that are inscribed on concrete & stone.
They are used for decoratives purposes or to allows greater traction/adhesion where further work may be required.
48. Lineman’s Hammer
The lineman’s hammer has traditionally been associated with the act of hammering bolts or large screws into materials such as utility poles.
It may seem very modest in structure and design, but the principle is the same with two circular hammers and a handle designed to absorb shock – often enhanced by a rubber grip.
49. Scutch Hammer
Scorching is the process of removing old mortar from bricks and paving. The hammers used for this have either ahead of and a chisel-like slotted scutch comb holder or two scutch comb holders.
The holders can hold scutch combs that act like serrated chisels or drums. Which one is used for a task depends on whether the user prefers a hammer or multiple scorching attachments.
Scotch hammers are used in the construction industry, particularly for cutting and carving bricks, but this is not your orthodox hammer.
The hammer comes with either a single-ended or double-ended scotch that allows specific cutting attachments to be used.
50. Gavel Hammer
The gavel hammer has a history that goes back centuries, allowing those in control to attract the attention of a crowd.
Commonly used at auctions, judges, and public meetings, this small compact hardwood hammer can definitely take control of any room demanding.
51. Rubber Hammer
Sometimes described as a rubber mallet, the rubber hammer is an extremely important tool where soft, but firm blows are required.
This type of hammer is commonly used in upholstery, woodworking, and those working with sheet metals.
The fact that the rubber’s head causes minimal damage makes it an ideal type of hammer when forcing materials such as plasterboard into place.
Frequently Asked Questions (FAQ)
Types of Hammers
- Claw Hammer
- Cross Peen Pin Hammer
- Engineering Hammer
- Hatchet Hammer
- Planishing hammer
- Power Hammer
- Rip Hammer
- Mechanics Hammer
- Chasing Hammer
- Ball Peen Hammer
- Tinners Hammer
- Prospectors Hammer
- Toolmaker’s Hammer
- Dead Blow Hammer
- Splitting Maul Hammer
- Slaters Hammer
- Dental Hammer
- Copper and Hide Hammer
- Lath Hammer
- Rock Hammer
- Scaling Hammer
- Shingle Hammer
- Spike Maul Hammer
- Straight Peen Hammer
- Knife-Edged Hammer
- Rock Climbing Hammer
- Brick Hammer
- Framing Hammer
- Welder’s Hammer
- Electricians Hammer
- Drywall Hammer
- Soft Face Hammer
- Railroad Spike Maul Hammer
- Stone Sledge Hammer
- Blacksmith’s Sledge Hammer
- Half Hatchet Hammer
- Trim Hammer
- Club Hammer
- Boiler Scaling Hammer
- Piton Hammer
- Blocking Hammer
- Brass Hammer
- Cross Peen Hammer
- Tack Hammer
- Sledge Hammer
- Blacksmith’s Hammer
- Bushing Hammer
- Lineman’s Hammer
- Scutch Hammer
- Gavel Hammer
- Rubber Hammer
Parts of a Hammer
- Claw or Peen
Ball Peen Hammer Use
Uses. Besides peening (surface hardening by an impact), the ball-peen hammer is useful for many tasks, such as striking punches and chisels (usually performed with the flat face of the hammer). The peening face is useful for rounding off edges of metal pins and fasteners, such as rivets.
Blacksmith Hammer Types
Types of forging power hammers used in forging shops:
- Lever-Spring hammers.
- Pneumatic hammers.
- Steam or air hammers.
- Helve hammers.
- Hydraulic hammers.
Spike Maul Hammer
A spike maul is a type of hand tool used to drive railroad spikes in railroad track work. It is also known as a spiking hammer.
Best Lineman Hammer
View Our Top Lineman Hammers ·
- Klein Tools 809-36 Lineman’s Hammer ·
- Estwing E3-40L Lineman’s Hammer ·
- Southwire Bmeh Heavy Duty Hammer.
Track Pin Hammer
Standard Pin Hammer for use with standard track pins. CAUTION: Always use safety clothing and goggles when using this product. Reference Pin Hammer.
Parts of Hammer Mill
Main Components of a Hammer Mill Machine
- The Feeding Mechanism of Pulverizer Hammer.
- Control box of Pulverizer Hammer.
- Crushing hammers/Knives.
- Hammer Mill Pulverizer Screens.